MA-AM-AA三元共聚物的制备及阻垢性能

以马来酸酐(MA)、丙烯酸(AA)和丙烯酰胺(AM)为原料,研制出环保型三元共聚阻垢剂PMAA,并通过研究其阻垢性能确定了产品的最佳工艺配方。实验结果表明,当单体的质量配比m(AA)∶m(AM)∶m(MA)=2∶3∶0·5,引发剂用量为单体总质量的1.5%,反应温度为80℃,单体质量分数为15%时,得到的聚合物PMAA的用量为5mg/L时,用国标法测得其对碳酸钙的阻垢率达94·15%,对磷酸钙的阻垢率达80·93%。     

中国铬盐生产现状与发展建议

较全面地回顾了中国铬盐生产历史和现状，系统总结了铬盐行业发展过程中的经验教训，提出了中国铬盐生产发展的建议，即中国铬盐工业在大型化的同时，应推广采用新工艺、新技术；应开发新品种，进行深加工；应密切注意最新技术动向，并及时跟进。     

环氧丙烷嵌入乙酸酐合成1,2-丙二醇二乙酸酯的绿色化学途径

用Mg-Al基复合物催化环氧丙烷(PO)一步嵌入乙酸酐(AA)合成了1,2-丙二醇二乙酸酯(PGDA),经红外光谱、电喷雾质谱鉴定得到了预期产物。研究了反应温度、n(PO)/n(AA)、PO滴加或一次性投入方式对单PO加成选择性的影响。实验结果表明,当Mg-Al基复合物用量为1.6 g/100 g AA,n(PO)/n(AA)=1,以0.75g/min滴加PO,反应温度130~135℃时,单PO加成选择性达到w(PGDA)=98.2%。与传统合成二元醇二酯的方法相比,该路线无需过量加入AA原料,亦不生成副产物,是一条具有工业化前景的合成二元醇二酯的高原子经济性的绿色化学途径。     

PE—g—MAH对PP／玻纤—硅灰石的增容作用

报道了聚乙烯接枝马来酸酐(PE-g-MAH)对玻璃纤维-硅灰石填允增强聚丙烯的增容效果。实验结果表明:选用合适接枝率的PE-g-MAH,PP/玻纤-硅灰石/PE-g-MAH共混物的力学性能随其用量的增加而明显提高,维卡耐热温度也得到提高。扫描电子显微镜观察断面的形态表明:PE-g-MAH的加入使填料在聚丙烯连续相中分散更均匀,且使断面变得粗糙,表明PE-g-MAH提高了相界面的作用力,对聚丙烯和填料起到了良好的增容作用。     

Surface-Enhanced Raman Scattering from Polyimide Model Compounds on Functionalized Metal Surfaces. Part II: Phthalic Anhydride/meta-Aminothiophenol/Silver

The interphase between a polyimide and a metal substrate was modeled by depositing phthalic anhydride (PA) onto a silver substrate pretreated with meta-aminothiophenol (m-ATP) and then curing in a mixture of acetic anhydride and pyridine or triethylamine. Surface-enhanced Raman scattering (SERS) and reflection-absorption infrared spectroscopy (RAIR) were used to determine the molecular structure of the interphase. It was found that m-ATP was adsorbed dissociatively onto silver substrates through the thiol groups. The tilt angle for m-ATP molecules adsorbed on silver substrates was determined using RAIR to be approximately 39°. However, there was no preferred rotational angle of the adsorbed APDS molecules about the molecular axes. When PA was deposited onto m-ATP pretreated silver substrates, anhydride groups of PA reacted with amino groups of m-ATP to form amic acids. When PA/m-ATP/Ag samples were chemically cured in acetic anhydride and pyridine or triethylamine, isoimide was the predominant product regardless of the use of pyridine or triethylamine as catalyst. These results were different from those obtained from PA/APDS/Au systems in which imide was the major product in the presence of triethylamine. These differences in the relative composition of cured products between two model systems were explained by the effect of substituents attached to APDS and m-ATP benzene rings.     

Study on esterification of acrylic phenolic resin by maleic anhydride and photocrosslinking properties of the alkali‐soluble product

An alkali‐soluble, photocrosslinkable polymer was synthesized by esterification of OH groups of acrylic phenolic resin with maleic anhydride. The OH groups were formed by the ring‐opening reaction of epoxy groups of epoxy phenolic resin with acrylic acid. The esterification conditions were studied. The results showed that it is better to use tetramethyl ammonium bromide as catalyst than N,N‐dimethylbenzylamine. The conversion of maleic anhydride in acetone can reach about 80% at 56°C for 4 h. The purified product was characterized by IR, DSC, and TGA. The product containing acrylate and maleic acid monoester groups, above a certain content, can be dissolved in 1% Na₂CO₃ solution. The photocrosslinkable properties of the product were investigated through selection of photoinitiator, accelarator, crosslinkable diluent monomer, etc. The acrylate and maleic acid monoester group‐containing phenolic resin exhibited very good photocrosslinking behavior, since it contains double bonds from both acrylate groups and maleic acid monoester groups. The activity of photoinitiator decreases in the order: isopropylthioanthraquinone > benzoin ethyl ether (BE) > anthraquinone (AQ) > benzophenone > Michel ketone (MK) > 2,2‐diethoxyacetophenone. The combination of some photoinitiators showed synergistic effects. The order of increasing activity for the accelerator is as follows: MK > ethyl p‐(dimethylamino)benzoate > N,N‐dimethylaniline > triethanolamine. The optimum diluent monomer is trimethylolpropane trimethacrylate. The gel content of the mixture of the resin and trimethylolpropane trimethacrylate could reach 85% using the combined photoinitiators of BE and AQ under UV exposure for 120 s. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1607–1614, 2005     

POE-g-MAH及其在增韧尼龙6中的应用

利用熔融接枝法制备了马来酸酐接枝乙烯-辛烯共聚物（POE-g—MAH），探讨了各个因素对POE-g—MAH接枝率和熔体流动速率（MFR）的影响，并得出了最佳配方、最佳工艺条件。将POE与接枝产物POE-g—MAH同时作为弹性体改性PA6时，体系的缺口冲击强度较纯尼龙提高近9倍，而其他力学性能改变不大。     

马来酸酐接枝聚丙烯研究进展

介绍了马来酸酐接枝聚丙烯的方法、机理,并重点介绍了溶液法和共单体熔融法影响接枝率的因素。     

加入助剂的马来酸酐熔融接枝聚丙烯研究

用双螺杆挤出机研究了马来酸酐 (MAH)对聚丙烯 (PP)的自由基熔融接枝。采用正交试验优化了熔融接枝条件 ,系统研究了引发剂过氧化二异丙苯 (DCP)、单体MAH、助剂ABX用量对马来酸酐接枝率的影响 ,并对其影响因素作了分析。研究表明ABX助剂能降低PP降解 ,同时也提高了马来酸酐的接枝率。确定了较佳的原料配比为m(PP)∶m(MAH)∶m(DCP)∶m(ABX)=1 0 0∶4∶0 4∶0 35。     

马来酸酐接枝聚丙烯的进展

马来酸酐接枝聚丙烯是拓宽聚丙烯应用领域的重要手段之一,本文综述了马来酸酐接枝聚丙烯的接枝方法和原理,接枝物的性能以及接枝物在聚丙烯合金和共混物、复合材料、粘合剂和涂料领域的广泛应用。